DDR 200-pin SODIMM: Approximately 2.625 in. by 1.25 in. (66.7 mm by 31.75 mm)
DDR2 200-pin SODIMM: Approximately 2.625 in. by 1.18 in. (66.7 mm by 30 mm)
Do you have questions about this product?You may contact Customer Service or...
get answers from real customers and in-house experts with AnswerBox.
Q:Hi just bought 2 of these part number CT12864X335AP for my Apple PowerBook 15 inch 1.5 ghz ,are these the right ones? Thank you
A:Yes, CT12864X335AP is the correct part for your PowerBook. Once you have installed the modules the computer will take over and automatically make any necessary adjustments.
Thanks for your message.
I have had a look in to this and unfortunately I have been unable to find an installation guide for this specific model. I would recommend contacting Acer directly who will be able to provide and installation guide for you.
I checked with the Acer website for an instruction manual but they don't have any listed. I am sure if you contact them directly they would be able to help.
Please let me know how it goes and if there is anything else we can help with.
I just got a new Crucial ct102464ba160b http://www.crucial.com/usa/en/ct102464ba160b
based on the suggestion here http://n40l.wikia.com/wiki/Memory that it is compatible with
HP Microserver N54L
My system runs fine the the original 2GB HP memory but when I put the Crucial stick in
it doesn't POST (can't see anything on the screen at all).
How do I check whether the RAM is not compatible or it's simply a DOA?
I ran the scan, it takes me to this page,
CT3694396 - 8GB DDR3 PC3-12800 Unbuffered NON-ECC 1.5V 1024Meg x 64
I am sorry for the issues that you have been experiencing with your new RAM. How much RAM is found when you use our System Scanner. This scanner can be found here. If a module is missing (scanner shows empty slot), it's likely an installation issue.If the modules are half detected by the scanner, it could be a density issue. Please check the scanner and let us know and we can see what other troubleshooting we may be able to try.
got a rare bluescreen 0x0000001a "Memory Management".
My Motherboard is a Gigabyte H97 HD3. (Bios F4)
The Crucial Ram is a 8GB-Kit PC3 - 12800 CL9, 1.5v
I tested both sticks (together) with memtest for 12 passes overnight (0 errors),
Does it make sense to test each on its own ?
Are these components incompatible ?