Free shipping | Holiday deals

I See a Flashing Question Mark on the Screen When Booting from My SSD (Mac® System)

If you have purchased a new SSD and installed it into the main drive bay of your system, the first thing you need to do is to initialize it for first use. If you attempt to boot from an SSD without an operating system installed, a flashing question mark appears to indicate that there is no bootable device. To initialize your SSD for first use, please follow the steps found here. After your SSD is initialized and picked up as usable drive in Disk Utility, you are ready to reinstall OS X®. This can be done by using the Apple® Recovery Mode (Command + R) or using the Recovery CDs that came with your Mac® computer. You can also restore from a backup, described here.

My SSD was working fine or cloned/restored from a working drive but now a question mark appears on screen every time I power on and it doesn't boot

If your system was working but you are now suddenly seeing a flashing question mark, you can try the following steps to restore things back to normal:

  1. Power off your Mac computer by holding the power button until it turns off
  2. Power on your Mac computer again and hold the Command and R keys to boot into the Mac Recovery Mode. If you have an earlier Mac (pre 2011) you might need to use your Recovery CDs that came with your system to access recovery
  3. After the Utilities window appears, choose Disk Utility from the menu
  4. Click on the name of your SSD on the left hand side of Disk Utility. If your SSD is not listed here, double check the drive bay to ensure the SSD is seated correctly. In rare cases you may need to perform a power cycle to allow it to be detected again.
  5. Click on the First Aid tab
  6. Select Repair Disk to repair any problems that may have occurred on OS X
  7. After the process is complete, you can close the window and restart your system

My SSD was working fine but now a question mark briefly appears on screen and takes longer than normal to boot

This suggests that you may need to reselect your SSD as the main startup disk in the System Preferences. The flashing question mark means the system cannot immediately boot using the SSD and is looking for other boot devices before loading. You can try the steps below to resolve this:

  1. Click on the Apple menu (Apple logo) and select System Preferences, then click Startup Disk
  2. Click on the name of your SSD under the Select the system you want to use to start up your computer heading
  3. Click the restart button and your Mac computer should no longer show the question mark during startup

If the above methods do not resolve your startup error, please contact us for further support.

©2019 Micron Technology, Inc. All rights reserved. Information, products, and/or specifications are subject to change without notice. Neither Crucial nor Micron Technology, Inc. is responsible for omissions or errors in typography or photography. Micron, the Micron logo, Crucial, and the Crucial logo are trademarks or registered trademarks of Micron Technology, Inc. Apple, Mac, OS X, are trademarks of Apple, Inc., registered in the United States and/or other countries. All other trademarks and service marks are the property of their respective owners.